Tiles and grout get dirty at times and when they do, they can become very difficult to clean. If this is your problem, then the best route to take is to call the experts. They will provide you with the best tile & grout cleaning services in the easiest and most hassle-free manner.  

Tiles and Grout

However, there are a few ways that you can do to clean tiles and grouts yourself, in case you prefer not to call the professionals until it becomes highly necessary. You can perform the steps below and see if they will work for the tiles and grout in your kitchen and bathroom. 

  1. Use the baking soda and water technique.

Simply mix three parts of baking soda to one part of water to create a thick paste. This will serve as your cleaner and it is supposed to work with all colors of grout. Wear rubber gloves and apply the paste to the grout using your finger.  

  1. Mix vinegar with water.

Mix one part of vinegar with one part water and put the resulting solution in a spray bottle. Spay the solution to the baking soda paste applied on grout. Doing so will trigger some bubbling and that’s exactly what should happen, as it means that the cleaning process has just begun. However, you must never use vinegar if your tiles are made with natural stone, limestone, or marble as doing so can be quite harmful.  

  1. Wait for the solution to stop bubbling. 

The bubbling action is caused by the chemical reaction between the vinegar and baking soda. This will generally last for a few minutes and then stop. When it stops, it means that the chemical cleaning action is done and it’s time for the next step.  

  1. Scrub. 

Using a nylon bristled brush, scrub the tiles and grout. Pay extra attention to the edges and corner of the tiles. At this point, you should find it easier to remove the dirt that has stuck in the grout. Brush until the tiles and grout come out clean.  

  1. Mop the floor. 

Splash some plain water on the floor and mop it well. Mopping will remove the residue from the baking soda and vinegar. Be sure to rinse the mop regularly during the cleaning process to keep the residue from spreading all over the floor.  

This is just one of the many ways for you to easily clean the tile and grout in your home. Just make sure that you’re not using vinegar on certain tiles and you should be all set. If this method seems too complicated for you, simply call the experts and they’ll do all the cleaning.  

Tile & grout sanitation is never easy, as the dirt may get stubborn even after doing all of the steps above. Some dirt can only be removed by special cleaning agents and state-of-the-art equipment that only the professionals have access to. It’s always better to call the professionals because the results that you get are usually far more impressive.